Delano Furnace Repair After Inspection Found Two Weak Parts
A Delano homeowner scheduled a furnace inspection and maintenance visit with Full Time Heating & Cooling after finding us on Google.
During the inspection, our HVAC technician found a weak igniter and a weak blower motor run capacitor. The homeowner chose to have both parts replaced, so the technician installed OEM-quality replacement parts and then tested the furnace again.
Once the furnace was operating, the technician completed a combustion analysis to check carbon monoxide levels. The reading was 35 PPM, within the acceptable range documented during the service visit.
The only additional concern was the air filter. The homeowner was using a 14x20x1 MERV 11 filter, which was creating more airflow restriction than recommended for this system. The technician recommended switching to a MERV 8 or lower filter.
The furnace otherwise had no mechanical issues and was left in good working order. The homeowner also received a furnace inspection checklist showing which items passed, were flagged, or failed, giving them a clear record of the condition of the system.
Repair completed: June 2026
Repair cost: $295
Repair time: Under one hour
Result: Two weakening furnace components were replaced before they caused a breakdown, combustion levels were checked, and the furnace was confirmed to be operating properly.
“Very courteous and on time. Told us what needed to be done and had the parts. Highly recommend Full Time Heating and Cooling.”
Paul E. | Delano, MN | June 2026
